Konica Minolta 7022 Instruction Manual page 152

Copying Mixed Size Originals (Mixed Original) (continued)
2.
Touch Special Original on the Application Selection Screen.
The Special Original Screen will be displayed.
3.
Touch Mixed Original.
4.
Touch OK to return to the Application Selection Screen.
5.
Touch OK to return to the Basic Screen.
6.
Select additional copying features, as desired.
APS is automatically selected on the Basic Screen.
To select AMS, touch the tray key on the Basic Screen to select the desired
paper size.
7.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
6.
Position mixed original(s) FACE UP in the document feeder.
• See p. 3-3 for details on positioning originals.
• Use RADF store mode (p. 3-22 to p. 3-24) when the original count
7.
Press [START].
When the finisher / paper exit / inner tray capacity is exceeded
due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.
8-26
DETAILS
HINT
HINTS
exceeds 50.
CAUTION