Konica Minolta 7022 Instruction Manual page 130

Inserting Sheets and Covers (Sheet/Cover Insertion) (continued)
1.
Load insert/cover sheets into tray 1, and load regular sheets of the
same size into copy paper tray source.
• When using thick paper for covers, load them in the Multi-sheet bypass
• Be sure that the trays for copy paper, front/back covers, and insertions
The source of insertions and covers can be shifted from tray 1 to tray 2, 3, 4,
or Multi-sheet bypass tray by Key operator. See p. 11-42 ~ p. 11-45.
2.
Press [APPLICATION] on the control panel.
The Application Selection Screen will be displayed on the touch panel.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
3.
Touch Sheet/Cover Insertion on the Application Selection Screen.
The Sheet/Cover Insertion Screen will be displayed.
4.
Select the cover sheet tray source.
Touch TRAY1 for feeding from tray 1, or BYPASS for feeding from the Multi-sheet
bypass tray.
If no cover is desired, proceed to step 6.
8-4
DETAILS
tray.
have the same paper size loaded.
HINT
HELP
CHECK
APPLICATION
OUTPUT
AUTO RESET
Reminder!
DATA
FAX
1 2 3
INTERRU
4 5 6
7 8 9
0
STAR
CLEAR QTY.