Reducing Images to Create Binding Margin (Reduce&Shift) (continued)
1.
Press [APPLICATION] on the control panel.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Touch Image Shift on the Application Selection Screen.
The Image Shift Setting Screen will be displayed.
3.
Touch Reduce & Shift, then specify the shift amount.
Use the up/down arrow key to enter the desired shift amount, from -250 to +250mm in
1mm increments.
The AMS will automatically determine the magnification ratio according to
the shift amount specified for the front page. The shift amount and
magnification ratio determined for the front page will be automatically
applied to the back page.
8-54
HELP
CHECK
APPLICATION
OUTPUT
AUTO RESET
Reminder!
DETAILS
DATA
FAX
1
2
3
INTERRU
4
5
6
7
8
9
0
STAR
CLEAR QTY.