Interrupt Copying; To Copy Using Interrupt Mode - Konica Minolta BIZHUB 500 User Manual

8
8.3

Interrupt Copying

Use the Interrupt mode to interrupt printing in progress to perform another
job in different settings. The interrupted job will resume automatically when
the interrupt copying is completed.

To copy using Interrupt mode

0 To interpose a newly entered job not into the current printing job but
between two reserved jobs, use the Increase Priority function. For details,
see "Increase Priority for Printing an Active Job in Current Jobs" on
page 9-23.
0 The Interrupt mode cannot be entered while the machine is scanning the
original. Press [Interrupt] after scanning is completed.
0 Once the Interrupt mode is entered, the current printing job will be
suspended and all the settings will resume the initial setting.
1
Position the original for the interrupt job.
2
Press [Interrupt] on the control panel.
When the machine is working on a
printing job, the message "Job is
stopping" will be displayed.
The Interrupt LED lights up in green,
and then printing job stops.
3
Enter the print quantity for the interrupt job.
4
Set copy conditions, as desired.
5
Press [Start] on the control panel.
The interrupt copying will start.
8-10
Advanced Information
bizhub 500/420