Konica Minolta 7022 Instruction Manual page 156

Copying Non-Standard Size Originals (Non-Standard Size) (continued)
3.
Touch Non-Stnd Size.
4.
Touch OK to return to the Application Selection Screen.
5.
Touch OK to return to the Basic Screen.
6.
Select additional copying features, as desired.
7.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
8.
Position original(s) FACE UP in the document feeder.
• See p. 3-2 for details on positioning originals.
• Use RADF store mode (p. 3-22 to p. 3-24) when the original count
9.
Press [START].
When the finisher / paper exit / inner tray capacity is exceeded
due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.
8-30
HINT
HINTS
exceeds 50.
CAUTION