Konica Minolta 7022 Instruction Manual page 174

Eliminating Black Copy Marks Along Borders (Frame/Fold Erasure) (continued)
6.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
7.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
8.
Position original(s) FACE UP in the document feeder or FACE DOWN
on the platen glass.
For details on positioning originals, see p. 3-2 to p. 3-6.
When closing the document feeder on a thick original (e.g. open book), do
not press it down too hard. Keep the document feeder open, if required.
9.
Press [START].
When the finisher / paper exit / inner tray capacity is exceeded
due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.
8-48
HINT
HINT
DETAILS
CAUTION