Konica Minolta 7022 Instruction Manual page 25

CAUTION: Paper Capacity for the Exit Tray
The exit tray capacity is max. 100 sheets. If a copy run of more than 100 is required, be
sure to remove the copies from the exit tray before the maximum capacity is reached.
Failure to do so will cause the copier to jam.
CAUTION: Paper Capacity for the IT-101 Inner Tray
The IT-101 Inner Tray is equipped with two exit trays.
Select an exit tray and output mode on the Output Mode popup menu.
To prevent paper misfeed, do not exceed the paper capacity of the Inner tray.
When the total number of copies in the copy run exceeds the capacity stated in Section
9, be sure to unload the exit tray while the copier is still copying. Failure to do so will
cause the copier to jam.
CAUTION: FS-107 Finisher Paper Capacity
The FS-107 Finisher is equipped with two exit trays, which may be increased to three or
four trays by installing the optional FT-107 Finisher Tray(s).
Select an exit tray and output mode on the Output Mode popup menu.
To prevent paper misfeed, do not exceed the paper capacity of the Finisher.
When the total number of copies in the copy run exceeds the capacity stated in Section
9, be sure to unload the exit tray while the copier is still copying. Failure to do so will
cause the copier to jam.
Requirements for Safe Use (continued)
1
Safety
Information
1-9