Konica Minolta 7022 Instruction Manual page 66

Making Double-Sided Copies (1
7.
Replace the original on the platen glass with the back side down, then
touch SCAN.
Repeat this step until all originals are scanned.
Memory indicator on the upper right of the Basic Screen allows you to check
the remaining memory.
To delete the scanned data without printing, press [STOP/CLEAR].
8.
Press [START] to print.
All the data in memory will be output.
Press [STOP/CLEAR] to suspend the printing job.
When the finisher / paper exit / inner tray capacity is exceeded
due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.
3-20
DETAILS
CAUTION
2 , 2 2 ) (continued)
a a