Konica Minolta 7022 Instruction Manual page 178

Adjusting Position of Copy Image (Image Shift) (continued)
2.
Touch Image Shift on the Application Selection Screen.
The Image Shift Setting Screen will be displayed.
3.
Touch Image Shift, then specify the shift amount.
Use the up/down arrow key to enter the desired shift amount, from -250 to +250mm in
1mm increments.
4.
Touch OK.
The Application Selection Screen will be restored.
5.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
6.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
7.
Position original(s) FACE UP in the document feeder or FACE DOWN
on the platen glass.
For details on positioning originals, see p. 3-2 to p. 3-6.
8.
Press [START].
When the finisher / paper exit / inner tray capacity is exceeded
due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.
8-52
HINT
HINT
CAUTION