Konica Minolta 7022 Instruction Manual page 149

Dividing an Image into Right and Left Pages (Dual Page) (continued)
5.
Touch OK.
The Application Selection Screen will be restored.
6.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
APS and AMS are automatically released, and the Store mode is automatically
selected.
7.
Select the desired copy mode and magnification.
• When selecting Facing pages mode and scanning from the platen glass,
select 1
• APS and AMS are released and 1.00 magnification is selected automati-
cally. Change the magnification manually, if desired.
8.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
9.
Position original(s).
When using platen glass to scan, position the first page FACE DOWN with document
feeder kept open.
When using document feeder, position original(s) FACE UP.
For details on scanning originals in Front cover + Facing pages and Front/Back + Fac-
ing pages mode, see the description on the following page.
10.
Touch SCAN on the Basic Screen to scan.
11.
Repeat steps 9 and 10 for all originals.
When using platen glass, Non-Image Area Erase and AUTO Layout are
automatically selected.
DO NOT CLOSE the document feeder throughout the scanning job.
12.
Press [START].
The copier will start printing when ready for output.
When the finisher / paper exit / inner tray capacity is exceeded
due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.
DETAILS
1 or 1 2 copy mode.
a a
HINT
Reminder!
CAUTION
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Image Insert
Dual Page
Mixed
Original
Folded
Original
Non-Standard
Size
Flip Side 2
Text/Photo
Enhance
Reverse
Image
Repeat
8
Applications
Frame/Fold
Erasure
AUTO
Layout
Image Shift
Reduce &
Shift
Non-Image
Area Erase
Stamp
Overlay
8-23