Konica Minolta 7022 Instruction Manual page 170

Repeating Automatically or Selecting Repeating Times (Repeat:
4.
Touch to highlight the desired mode key.
Touch RepeatX2, RepeatX4, or RepeatX8 to select the desired Repeat mode.
Touch OK to return to the Repeat Mode Selection Screen.
5.
Touch OK.
The Application Selection Screen will be restored.
Non-Image Area Erase is automatically selected on the Application Selection
Screen when AUTO mode is selected.
6.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
7.
Select the desired magnification and paper size.
• APS and AMS are automatically released, and 1.00 (100%) is selected
• When RepeatX2, RepeatX4, or RepeatX8 is selected, the scanning area
• Copy mode is automatically set to 1
8.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
9.
Position original.
For AUTO mode original, open the document feeder, then position the original FACE
DOWN on the platen glass.
For RepeatX2, RepeatX4 or RepeatX8 mode original, RADF is also available.
See the illustration on p. 8-42 for details.
When AUTO mode is selected, Non-Image Area Erase functions automatically.
DO NOT close the document feeder.
8-44
DETAILS
DETAILS
as a magnification ratio.
will be a portion of the selected paper size equally divided according to
the selected mode.
In this case, magnification ratio will be fixed to 1.00 (100%).
Platen store mode will function automatically.
HINT
HINT
Reminder!
AUTO/ Repeat Mode) (continued)
1 . When selecting 1
a
2 mode,
a