Konica Minolta 7022 Instruction Manual page 166

Repeating Selected Image Area (Repeat: Vert./Horiz. Mode) (continued)
3.
Touch Vert./horiz.
The Vertical/Horizontal Width Setting Screen will be displayed.
4.
Specify the vertical and horizontal widths of the scanning area.
Use the up/down arrow key to enter the width from 10 to 150mm in 1mm increments.
Hold the key to increase/decrease the value continuously.
Touch OK to restore the Repeat Mode Selection Screen.
5.
Touch OK.
The Application Selection Screen will be restored.
6.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
7.
Select the desired magnification and paper size.
• APS and AMS are automatically released, and 1.00 (100%) is selected
• Copy mode is automatically set to 1
8.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
8-40
DETAILS
as a magnification ratio.
Platen store mode will function automatically.
HINT
1 . When selecting 1
a
2 mode,
a