Konica Minolta 7022 Instruction Manual page 255

Memory Switch Screen 2
Procedure
1 Touch [12] Memory SW on the Key Operator Mode Screen to display the Memory
Switch Screen.
2 Use the procedure below to select the desired item and change the setting.
(1) Touch the arrow keys
the desired item.
(2) Touch the arrow keys
(3) Touch EDIT to change the setting of the highlighted item.
(4) Repeat above steps (1) to (3) to make several changes in succession.
3 Touch RETURN to restore the Key Operator Mode Screen.
4 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
The following functions can be provided by the Memory switch settings.
[1] Auto reset timer
Sets the time interval for the machine to reset to the initial condition.
Options: Off or 30/60/90/120/150/180/210/240/270/300 seconds.
[2] AUTO RESET effect
Sets the condition of Copy mode, Copy density, Magnification, and Paper tray selection
when the [AUTO RESET] key is pressed.
Options: Full-auto (factory setting) or Initial (key operator setting). Initial is the default
setting.
[3] Load RADF effect
Determines how the machine initializes when it is in the platen copy mode (non RADF)
and an original is inserted in the RADF feed tray.
Options: RADF and RADF + Auto Reset. The RADF option will activate the RADF
without resetting any other features. The RADF + Auto Reset option will activate the
RADF and reset the machine to the features programmed in memory switch #2.
[4] Non Image Area Erase
Establishes how the machine determines the image area of the copy.
Options: ON and APS/AMS only. ON option limits the copy image area to that of the
original. The APS/AMS only option limits the copy image area to that of the copy paper
sizes and the magnification automatically selected by the machine.
[12] Memory Switch (continued)
Memory Switch Screen 3
and at the right on the Memory Switch Screen to select
c d
and at the lower left to scroll the screen.
? @
Memory Switch Screen 4
Key Operator
Mode
System Initial
Copier Initial
Preset Key
E.K.C.
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Data
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
11
Key Operator
Mode
11-43