Konica Minolta 7022 Instruction Manual page 257

[18] Job memory recall
This feature allows the machine to initialize using selections stored in job memory
No.15 when the power is turned on or the [AUTO RESET] key is pressed.
NOTE:
This function works only when job memory No.15 is registered.
[19] Sheet insertion
This setting allows selection of tray 1, tray 2, tray 3, tray 4, or Bypass as the source of
the inserted sheets.
[20] A5 orig. type
Selects orientation of A5 size originals.
Options: Landscape or portrait.
[21] Rotation
When turned on the feature allows the machine to automatically rotate an A4 original
image to match the manually selected paper size. For example, if an original is placed
in the RADF or on the platen glass in the A4R position and the A4 paper size is
selected, the machine will rotate the image to fit the A4 paper.
[22] 1 SHOT indication time
Determines the duration of messages that are displayed, i.e., 50 SHEETS MAXIMUM
IN STAPLE MODE. Options: 1/ 2/ 3/ 4 or 5 seconds.
[23] AUTO START
This feature allows the machine to start the copying operation as soon as the document
feeder/platen cover is closed down over the platen original.
[24] No-printing timer
Set the timer to allow the printing job to start after operating the copying job.
[25] Power save key
Select the power saver mode to be activated by pressing [POWER SAVER ON/OFF]
key.
[26] Bypass tray size
Select the paper size detectable on the Multi-sheet bypass tray.
[12] Memory Switch (continued)
Key Operator
Mode
System Initial
Copier Initial
Preset Key
E.K.C.
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Data
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
11
Key Operator
Mode
11-45