Konica Minolta 7022 Instruction Manual page 11

• Machine Status Confirmation
Displays the current machine status on LCD for confirmation.
• Manual Shut-off
Shuts off the machine's power when pressing [POWER SAVER ON/OFF] on the control
panel.
• Mixed Original
Copies mixed size originals from the document feeder in APS or AMS mode. APS
automatically selects the paper size of each original. AMS mode allows you to select
one paper size for all originals.
• Non-Image Area Erase
When copying from the platen glass when the document cover is open, copies only the
image area and not the exposed area of glass, which would otherwise copy as black.
• Non-Standard Size
Identifies the special original size which the 7022/7130 cannot detect, in order to select
the optimal paper size for copying or printing.
• OHP
Copies onto transparency film and interleave blank or copied paper for each original
copied.
• Output Mode for Machine with FS-107 Finisher Installed:
Non-Sort, Sort, Staple, and Group modes using the two exit trays (or three/four exit
trays including optional FT-107 tray)
Selects an output tray and output mode on the Output Mode popup menu.
• Output Mode for Machine with IT-101 Inner Tray Installed:
Non-Sort, Rotation sort, Rotation group, and Group modes using the two exit trays
Selects an output tray and output mode on the Output Mode popup menu.
• Output for Machine with no Finisher Installed:
Non-sort, Rotation sort, Rotation group, and Group modes
Selects an output mode on the Output Mode popup menu.
• Paper Capacity
Total 1,050 sheets in the machine with DK-109 desk, including a 50-sheet Multi-sheet
bypass tray.
Total 2,050 sheets in the machine with DB-210 drawer, including four 500-sheet trays
and a 50-sheet Multi-sheet bypass tray.
Total 2,550 sheets in the machine with DB-410 drawer, including a 1,500-sheet tray and
a 50-sheet Multi-sheet bypass tray.
• Platen Memory
Scans documents into memory from the platen glass and/or the document feeder and
inserts the pages into another document copied from the document feeder. If an
incompatible function is selected in this mode, the latter function will not be selected,
and an Error message will be displayed.
Features of the Konica 7022/7130 (continued)
ix