Konica Minolta 7022 Instruction Manual page 235

4 To edit the EKC data, touch the
Lower arrow key on the right in the EKC Data
d
List Screen to highlight the EKC data to be edited,
then touch EDIT. The EKC Data Edit Screen with
valid Clear key will be displayed.
(1) To edit the EKC password, touch Password.
Enter a new 5-digit EKC password using the
keypad on the control panel. Do not enter
"00000".
(2) To edit the name, touch Name. The Name
Input Screen will be displayed. See p. 11-21.
(3) To edit the copy limit, touch Limit. Enter a new
6-digit copy limit using the keypad on the control panel. Entering "000000" signifies
no copy limit.
(4) To clear the copy count, touch Clear.
5 Touch OK on the EKC Data Input Screen or the EKC Data Edit Screen to complete the
settings and return to the EKC Data List Screen.
To cancel the changes made in step 3 or 4, touch RETURN to restore the EKC Data List
Screen.
6 Touch RETURN on the EKC Data List Screen to restore the EKC Setting Menu Screen.
If other EKC setting changes are required, touch the desired key.
7 Touch RETURN to restore the Key Operator Mode Screen.
8 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
[4] E.K.C. (Electronic Key Counter) (continued)
Upper arrow or
c
Key Operator
Mode
System Initial
Copier Initial
Preset Key
E.K.C.
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Data
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
11
Key Operator
Mode
11-23