Konica Minolta 7022 Instruction Manual page 225

You can also select on/off of the Automatic rotation initial setting. To release the
Automatic rotation mode, touch AUTO so that it is no longer highlighted.
3 For the machine with Inner tray, perform the following operation and proceed to step 5.
To select the exit tray, touch TRAY 1 or TRAY 2.
To select the Output mode, touch GROUP, E-SORT+sort, or E-SORT+group.
You can also select on/off of the Automatic rotation initial setting. To release the
Automatic rotation mode, touch AUTO so that it is no longer highlighted.
4 For the machine without Finisher, perform the following operation and proceed to step 5.
To select the Output mode, touch GROUP, E-SORT+sort, or E-SORT+group.
You can also select on/off of the Automatic rotation initial setting. To release the
Automatic rotation mode, touch AUTO so that it is no longer highlighted.
5 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen. If
other copier initial setting changes are required, touch the desired key.
6 Touch RETURN to restore the Key Operator Mode Screen.
7 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
[2] Copier Initial (continued)
Key Operator
Mode
System Initial
Copier Initial
Preset Key
E.K.C.
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Data
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
11
Key Operator
Mode
11-13