Using The Utility Mode (Fax); Setting Up The Fax Registration - Konica Minolta FX-3 User Manual

Using the Utility Mode (Fax)

6 Using the Utility Mode (Fax)
6.1

Setting Up the Fax Registration

From the "FAX REGISTRATION" menu, various settings can be specified
in order to take advantage of this machine's many fax functions.
FAX
No.
REGISTRATION
1 ONE-TOUCH
DIAL
2 SPEED DIAL
3 GROUP DIAL
4 PROGRAM DIAL
5 BATCH TX
6 MAILBOX
7 RELAY BOX
* By installing the optional Network Interface Card, settings can also be specified from the
network tool PageScope Light. (p. 6-62)
Fax Kit (FX-3)
Characteristic/Description
This function can be used to program one-touch dial keys with
fax numbers, allowing the recipient to be specified easily and
accurately without the need to manually enter the number
using the 10-Key Pad.
A maximum of 27 settings can be programmed. This dialing
method is convenient for programming numbers where faxes
are frequently sent to.
This function can be used to program speed dial numbers with
fax numbers, allowing the recipient to be specified easily and
accurately without the need to manually enter the number
using the 10-Key Pad.
A maximum of 200 fax numbers can be programmed.
This function can be used to program a single one-touch dial
key with a maximum of 50 different fax numbers as one group.
Programming a one-touch dial key with a group of fax numbers
is convenient when documents are frequently sent to a set
group of multiple recipients.
This function can be used to program one-touch dial keys with
fax numbers and a transmission/reception function (such as
timer transmission or polling reception), allowing that function
to be carried out by pressing just the corresponding one-touch
dial key.
This function can be used to specify the batch transmission
setting (transmission time) for a one-touch dial key
programmed with recipient fax numbers, so multiple
documents can be stored in the memory and sent out together
at the specified time.
This function can be used to specify mailbox IDs in order to
receive faxes with mailbox reception only if the mailbox ID sent
by the caller matches the mailbox ID set on this machine.
This function can be used to program the relay boxes in order
for this machine (acting as a relay station) to receive a
document from another fax machine (transmitting station), then
transmit the document to multiple recipients (receiving
stations).
6
6-1