Inserting a new print material roll
Before you use the copier for the first time, you have to choose the order in
which the paper formats are shown on the scanner operating panel. You can do
this by choosing between ISO, ANSI or ARCHITECT paper format on the
printer operating panel.
Setting the media format
Press 'Program' to enter the main menu.
1
Select the '
2
Press 'next/select' to enter the '
3
Select '
4
Press 'next/select' to enter the '
5
Select '
6
Press 'next/select' to enter the '
7
Select the required format using the
8
Press 'next/select' to confirm the selected format.
9
Press 'Program' to leave the main menu.
10
If the message 'ROLL EMPTY' appears in the display, you have to load a new
roll of print material. Depending on your configuration you can reload roll 1
and/or roll 2.
After reloading the plot is re-printed automatically.
Note:
Automatic roll switching
If a roll becomes empty the printer reports a roll empty error. The printing
stops. The printer clears the paperpath and generates a message to indicate that
the printer is ready to accept a new print command. If the correct material type
and material format is on the other roll, the printer will use the other roll and
will resume printing automatically.
If there is no match of material type and material format, you have to refill the
empty roll.
40
Océ 9400-II User Manual
CONFIGURATION
' using the
PLOT MANAGER
' using the
MEDIA FORMAT
' item using the
CONFIGURATION
or
button.
PLOT MANAGER
or
button.
MEDIA FORMAT
or
button.
or
button.
' menu.
' menu.
' menu.