Printing Via Lpd; Printing Via Ftp - Oce 9400-II User Manual

Printing via FTP

After the network connection for the Océ 9400-II has been set up you can print
via FTP.
We implement the File Transfer protocol (FTP) as specified in RCF 959.
Note:
We are also web browser compatible and thus the Océ 9400-II printer can be
accessed like any Ftp site from your web browser.
Printing via FTP
Although FTP is not a standard printing protocol, you can send data files
Note:
to a remote directory via FTP. This remote directory then allows the data files
to be printed.
Launch an FTP client.
1
Enter the 'ftp' command.
2
Open a FTP session with the printer using its address or the registered name
3
(HOSTS or DNS).
Instead of performing steps 2 and 3 you could also enter "ftp
Note:
host_name" in the FTP client.
Enter your user name (e.g. 'Guest').
4
In order to be connected to the remote server, you then validate the user
5
connection by typing in the user password (e.g. 'Guest').
As there is no registered user, you can simply press Enter to initiate
Note:
the connection. User name and password are not checked by the Océ
9400-II.
Set the transmission mode to binary by entering 'binary'.
6
Go to the jobs directory using the following command: 'cd jobs'.
7
Go to the local directory in which the data you want to print are stored (for
8
example C:\DRAWINGS) by using the following command:
Send the data file (for example: sample.hp) via the 'put' command:
9
The 'mput' command is also supported.
Note:
32 Océ 9400-II User Manual