Transformation; Print Rotation; Print Scaling - Oce 9400-II User Manual

Transformation

With the Océ 9400-II it is possible to change the position of the image on the
print, such as: rotating and scaling of the image. This applies only for vector
languages and when the media saver is switched off.

Print rotation

This function allows you to set the rotation applied to a print. Four values are
possible: 0°, 90°, 180° and 270°. Default is 0°. This function only applies for
vector languages.
Defining the print rotation
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the '
8
Press 'next/select' to enter the '
9
Select the required value using the
10
Press 'next/select' to confirm the setting.
11
Press 'Program' to leave the main menu.
12

Print scaling

The X-scale and Y-scale can be set individually to a value between 0.05 and
20.0. Default is 1.0. This function only applies for vector languages.
Defining print scaling
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
Press 'next/select' to enter the '
5
112 Océ 9400-II User Manual
' item using the
ONFIGURATION
' item using the
PLOT MANAGER
' item using the
TRANSFORM
' item using the
ROTATION
' item using the
ONFIGURATION
' item using the
PLOT MANAGER
or
' menu.
ONFIGURATION
or
' menu.
PLOT MANAGER
or button.
' menu.
TRANSFORM
or button.
' menu.
ROTATION
or button.
or
' menu.
ONFIGURATION
or
' menu.
PLOT MANAGER
button.
button.
button.
button.