Making Copies - Oce 9400-II User Manual

Making copies

The copying process starts after pressing the 'start' button. Before pressing the
'start' button, you can change the settings.
Feeding the original
Insert the original face down and right aligned, along the original guide on the
1
scanner feed table in such way that the line is completely visible (see
figure 23).
[23] Inserting the original
The original will be transported about 1 centimeter to a defined position.
Now you are ready to change settings or to start the copy process (see 'Starting
2
the copy process' on page 58).
If you make a copy within the time-out of 1 minute, the machine will use the
settings of the previous copy job.
Copy jobs 57