Originals That Can Be Used - Oce 9400-II User Manual

Originals that can be used

Overview of originals
Originals
Width
Length
Points of notice with regard to originals to be processed
Curls
Damaged origi-
nals
Miscellaneous
136 Océ 9400-II User Manual
Minimum Maximum recommended
210 mm 1020 mm (40") of which image width 914 mm
(8.5") (36") can be copied without loss of information
210 mm Guaranteed copy quality 3 meters or 10 feet.
(8.5") Maximum length limited by the worst-case speed
difference between scanner and printer; at least >
6m.
Originals with a curl diameter > 75mm, can easily be scanned.
If the diameter of the curl is < 75 mm with help from the oper-
ator, it is advisable to uncurl the leading edge to prevent prob-
lems.
Originals with a curl diameter < 50 mm, a carrier sheet may be
used (not thicker than 0.3 mm)
Dog-ears should be straightened out, especially on originals
with reinforcement borders.
Torn originals should be repaired with tape.
Badly damaged originals can be copied by inserting them into
carrier sheets.
The leading edge of the original must be straight.
The thickness of the original may be maximal 1.5 mm.
Filing strips with a thickness 3 mm.
Any paper clips, staples etc. should be removed from the orig-
inal before feeding it into the scanner.
Creased leading edges and trailing edges should be straight-
ened out.
Paste-ups should be taped down 100 % at all edge; a carrier
sheet may be used (not thicker than 0.3 mm)
Folded originals should be straightened out before feeding.
Wrinkles and folds may be visible on the copy.
Feed plotter originals in carrier sheets.