Operator Recoverable Errors (Printer) - Oce 9400-II User Manual

Operator recoverable errors (printer)

When the printer detects an error, the printer stops immediately. An error
message will be displayed on the panel. The user has to take action to solve the
problem.
Message
ERROR FEED TA-
BLE
PAPER REMOVED
PAPER TOO SHORT
PAPER JAM
FEED TABLE OPEN
CUTTER ERROR
ROLL EMPTY
PAPER JAM ROLL
ROLLUNIT OPEN
REFILL TONER
OPEN ROLLUNIT
CHECK OUTPUT-
TRAY
Solving problems
Description
Paper in feed table or feed table not closed
Remove the paper and/or close the feed table
The paper is removed from the feed table during a
print
The print material is too short
Remove the print material out of the engine
Paper jam in the print engine
Remove the paper out of the engine
The feed table is not closed properly
Close the feed table
The printer material is not properly cut
Remove the print material
The selected roll is empty
Remove the print material and place a new roll into the
rollunit
Paper jam in the rollunit
Remove the print material
The rollunit is open
Close the rollunit
User has to add toner
Open roll unit to remove the paper
Paper am in the compact output stacker
Remove the paper and press Continue
121