Interfaces
Centronics protocol
Centronics supports P1284 compatible and ECP modes.
SCSI-2 protocol
When the printer is attached to a SCSI-bus, it behaves itself as a standard SCSI
tape device. SCSI tape commands are used to address the Océ 9400-II for
upload.
Ethernet protocol
You can connect the printer to:
TCP/IP
NETBIOS (over TCP/IP).
Ethertalk/Novell can be supported by an external optional print server.
Note:
For more details refer to 'Ethernet' on page 27
132
Océ 9400-II User Manual