Oce 9400-II User Manual page 24

Press 'Program' to enter the main menu.
1
Select the '
2
Press 'next/select
3
Select the 'C
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the '
8
Press 'next/select' to enter the '
9
Select the required setting using the
10
Press 'next/select' to confirm the selected type.
11
Press 'Program' to leave the main menu.
12
Defining the end of plot time out
Normally, a print file will end with an instruction which tells the printer that
the file is finished.
However, some print data files do not have an end of print instruction. In this
case, the print will be considered as 'finished', when the printer does not
receive any more graphic commands on Centronics.
The print time out option, sets the delay after which the print will be considered
as finished. You can choose between: 15, 30, 180 and 500 seconds. Default is
180.
Press 'Program' to enter the main menu.
1
Select the '
2
Press 'next/select' to enter the '
3
Select the '
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the '
8
Press 'next/select' to enter the '
9
Select the required plot time out using the
10
Press 'next/select' to confirm the selected plot time out.
11
Press 'Program' to leave the main menu.
12
24 Océ 9400-II User Manual
menu using the
'
CONNECTIONS
to enter the '
'
' menu using the
ONNECTIONS
' item using the
CENTRONICS
' mode using the
ECP
' item using the
CONFIGURATION
' item using the
CONNECTION
' item using the
CENTRONICS
' item using the
PLOT TIME OUT
or
menu.
'
CONFIGURATION
or
' menu.
CONNECTION
or button.
' menu.
CENTRONICS
or button.
' menu.
ECP
or button.
or
' menu.
CONFIGURATION
or button.
' menu.
CONNECTION
or button.
' menu.
CENTRONICS
or
' menu.
PLOT TIME OUT
or
button.
button.
button.
button.
button.