Oce 9400-II User Manual page 26

Defining the SCSI-2 ID
You can select a number between 0 and 7. The default is 0. Check the
configuration of your computer to find an ID which is not used by another
device on the SCSI-2-bus to which you want to connect the Océ 9400-II.
Press 'Program' to enter the main menu.
1
Select the '
2
Press 'next/select' to enter the '
3
Select the 'C
4
Press 'next/select' to enter the '
5
Select the
6
Press 'next/select' to enter the SCSI-2 menu.
7
Select the '
8
Press 'next/select' to enter the '
9
Select the required '
10
Press 'next/select' to confirm the selected '
11
Press 'Program' to leave the main menu.
12
Switch the printer off/on to activate the configured settings.
13
Defining terminator
The termination should be set to 'ON' if the Océ 9400-II is the last device on
the SCSI-2 chain. It should be set to 'OFF' when it is placed in between.
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the '
3
Select the 'C
4
Press 'next/select' to enter the '
5
Select the
6
Press 'next/select' to enter the SCSI-2 menu.
7
Select the '
8
Press 'next/select' to enter the '
9
Select '
10
Press 'next/select' to confirm the required selection.
11
Press 'Program' to leave the main menu.
12
Switch the printer off/on to activate the configured settings.
13
26 Océ 9400-II User Manual
CONFIGURATION
' menu using the
ONNECTIONS
item using the
SCSI-2
' item using the
ID
' (ranging from 0 to 7) using the
ID
ONFIGURATION
' menu using the
ONNECTIONS
item using the
SCSI-2
' item using the
TERMINATION
/ ' using the
ON OFF
menu using the
'
CONFIGURATION
or
' menu.
CONNECTION
or button.
or button.
' menu.
ID
'.
ID
' menu using the
CONFIGURATION
or
' menu.
CONNECTION
or button.
or
' menu.
TERMINATION
or button.
or button.
menu.
'
button.
or button.
or button.
' menu.
button.
button.