Calcomp Step Size - Oce 9400-II User Manual

CalComp step size

If the data format type is set to CalComp (manual, auto selection or remote
control command), seven steps are provided (100 dpi to 4064 dpi). The default
is 2032.
Setting the appropriate step size
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the '
8
Press 'next/select' to enter the '
9
Select the required value using the
10
Press 'next/select' to confirm the selected value.
11
Press 'Program' to leave the main menu.
12
96 Océ 9400-II User Manual
' item using the
ONFIGURATION
' item using the
DATA FORMAT
' item using the
CALCOMP SETUP
' item using the
STEP SIZE
or
' menu.
ONFIGURATION
or
' menu.
DATA FORMAT
or
' menu.
CALCOMP SETUP
or button.
' menu.
STEP SIZE
or button.
button.
button.
button.