Print on special material placed in a paper tray
Print on special material
Print on special material placed in a paper tray
Introduction
You can use the following material for the print jobs.
Paper that is already in the trays.
Special material that you place in a tray for the current job.
Special material that is not suitable for the trays. You can insert such a sheet into
the special feeder.
The Key operator can have locked the paper-compartment door. This means that you
cannot load the special paper.
Note: You can also make the settings for a print job on special material in the printer
driver. When you arrive at the printer, you only have to place the material in the
paper tray and print the document
Before you begin
Send a document to your mailbox
Check which paper tray is suitable for your material.
How to print a job on special material placed in a paper tray
Open the paper-compartment door, place the material in one of the trays and close the
1.
door
Add paper to paper tray 1 2 and 3' on page 155 Add paper to paper tray 4' on page
153.
When you use labeled or punched material, you must pay attention to how you place the
material.
2.
Open your mailbox and use the scroll wheel to select the document
on page
66.
Press the 'Edit settings' key or press the scroll wheel key.
3.
Press the 'Paper' key.
4.
[80] Select another tray
Chapter 6 - The print jobs
The printer driver' on page
Send a document to your mailbox' on page
57.
59.
Open your mailbox'
90