Select the required pen priority using the
10
Press 'next/select' to confirm the selected pen priority.
11
Press 'Program' to leave the main menu
12
Merge mode
This option determines what happens when two or more colours intersect at the
same point of a plot, especially in area fills. Default setting is 'On'.
Merge Off
other colours specified for the same line or area are transparent.
Merge On
Setting the merge mode
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the '
8
Press 'next/select' to enter the '
9
Select '
10
Press 'next/select' to confirm the selected setting.
11
Press 'Program' to leave the main menu.
12
End of Message parameter
The End of Message (EOM) parameter is significant in all cases where
CalComp format is selected or auto-recognized when select format is set to
Auto or a remote control command for CalComp was sent.
Possible values range from 0 to 31
decimal equivalent of the byte indicating the end of the data sequence. It should
be a unique character in the character set used for coding the data. The default
EOM is 3.
Customizing the printer
Only the last colour specified is printed for a given line or area. The
All the specified colours are blended together.
ONFIGURATION
' item using the
DATA FORMAT
CALCOMP SETUP
' item using the
MERGE
' or '
' using the
YES
NO
or
' item using the
ONFIGURATION
or
' menu.
DATA FORMAT
' item using the
CALCOMP SETUP
or
button.
' menu.
MERGE
or
button.
inclusive. The selected value is the
DEC
button.
or
button.
' menu.
button.
or
button.
' menu.
93