Buttons - Oce 9400-II User Manual

Buttons

'Program'
this mode the user can use 'next/select' the 'previous' and
step through the menu.
Pressing 'Program' again, or if there is no action during 1 minute in Program
mode, the machine returns to the status mode.
If you press the Program button while the printer is printing, the led
Note:
above the program button flashes. As soon as the printing process is ready, you
automatically enter the program mode. Bear in mind that when you are in the
Program mode, the printer will not print.
'Next/select'
is present, enter a menu on a lower level.
'Previous'
Browse buttons
the same level of the menu, or to display the next or previous option from the
option list.
'Cancel/continue'
continue after an operator recoverable error.
12 Océ 9400-II User Manual
To activate the program mode and to enter the top level menu. In
To select an option or a setting in the menu. Or in case a submenu
By pressing this button you go one level higher in the menu.
These two buttons are used to select another mode at
or
This button is used to cancel the present print job or to
or buttons to