Switching on/off the printer
After switching on the printer is ready for operation.
Switching on the printer
Set the on/off switch at the rear of the printer to position '1' (see figure 4). If
1
the mains is connected correctly, the green switch will light up.
[4] On/off switch of the printer
When 'Ready' is displayed on the operating panel the printer is ready for
Note:
use.
Switching off the printer
Set the on/off switch at the rear of the printer to position '0' (see figure 4).
2
Attention:
information or a paper jam.
Getting started
Switching off the printer during a print job may cause loss of
19