Hp-Rtl - Oce 9400-II User Manual

Press 'next/select' to enter the '
9
Select '
10
Press 'next/select' to confirm the selected setting.
11
Press 'Program' to leave the main menu.
12

HP-RTL

HP-RTL is a subset of HP-GL/2. Hence, all HP-RTL plot data files must start
with ESC%-1BBPIN: or BPIN.
To use HP-RTL, the SELECT FORMAT should be set to AUTO or HP-GL/2
on the operating panel or HP-GL/2 must be selected via a remote control file.
HP-RTL plot data files must end with ESC%OB; PG; which will switch
Note:
the printer back to HP-GL/2 format mode. Without this command, the plot
results will be unpredictable and the printer will stop.
The following HP-RTL statements have no meaning on the Océ 9400-II and
will be treated as no-ops: ESC*v#a, ESC*v#b, ESC*v#c, ESC*v#i,
ESC*v#W[data], ESC*b#l and ESC&b#V[data].
90 Océ 9400-II User Manual
' or ' ' using the
YES NO
' menu.
MERGE
or button.