Clearing Paper Jams - Oce 9400-II User Manual

Clearing paper jams

If a jam occurs a message will be displayed on the operating panel. If paper
misfeeds occurs frequently, check if:
The roll(s) are loaded correctly and the media is fed as indicated.
The correct media is used (see 'Copy material that can be used' on page 137).
No scraps of material are blocking the paper path.
Clearing a paper jam in the material feed section
Switch off the printer.
1
Open the upper drawer.
2
Lower the feed table, using the two catches on the front underneath the feed
3
table (see figure 33).
[33] Lowering the feed table
Remove the jammed material.
4
Check thoroughly that no scraps of material are left behind.
Note:
Close the feed table.
5
Close the upper drawer.
6
Switch on the printer.
7
122 Océ 9400-II User Manual