Double synchronization code parameter
The synchronization code parameter is significant in all cases where CalComp
format is selected or auto-recognized when select format is set to Auto or a
remote control command for CalComp was sent.
The double synchronization parameter allows one or two synchronization
characters to identify the beginning of a message of print data. If set to double
synchronization, the same character is sent twice. Default is 'No'.
Setting the double synchronization code parameter
1
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the '
8
Press 'next/select' to enter the '
9
Select the required double sync using the
10
Press 'next/select' to confirm the selected value.
11
Press 'Program' to leave the main menu.
12
Customizing the printer
' item using the
ONFIGURATION
' item using the
DATA FORMAT
' item using the
CALCOMP SETUP
' item using the
DOUBLE SYNC
or
' menu.
ONFIGURATION
or
' menu.
DATA FORMAT
or
' menu.
CALCOMP SETUP
or
' menu.
DOUBLE SYNC
or
button.
button.
button.
button.
button.
95