Ethernet; Ethernet Cabling - Oce 9400-II User Manual

Ethernet

On your controller you find both an AUI transceiver connector (10 MB/s) and
an RJ45 connector (10 or 100Mb/s). Ethernet connections can therefore use
Thin or Thick Ethernet or UTP cabling.
It is advisable to use the RJ45 100 Mbit to have the highest possible
Note:
performance.
AUI: 10Mbit only
RJ45 (UTP): 10 & 100 Mbit (automatic adjustment).
Do not use the AUI and RJ45 simultaneously.

Ethernet cabling

An AUI (Attachment Unit Interface) connector is meant to connect a cable
from the network interface card in your controller to a transceiver mounted on
the backbone Ethernet cable. The backbone cable may be Thin or Thick
Ethernet cable.
[7] AUI port
Installation of the printer
AUI
27