Buttons And Displays In The Left-Hand Area - Oce VarioPrint 5000 Operating Manual

4.2.1.1 Buttons and displays in the left-hand area

4.2.1.1 Buttons and displays in the left-hand area
Button
50
Function
switches the printing system back from "Stop" or "Error" status to
operational status.
Requirements:
• all errors corrected
• Controller and system control are ready
When the printing system is ready for operation:
• printing is continued, when data is present
• "Ready" is displayed in the status display
• the color of the button changes from dark green to light green
the printing system switches to the "Stop" status.
Before the printing system stops, the pages produced on the PC drum
are transferred to the paper. All printed pages in the paper path are
ejected to the selected output tray.
With this button, an error can also be reset after correction without
changing the printing system status to "Ready". This means that paper
can be added or another activity can be carried out before printing is
continued.
In the "Stop" mode, the color of the button changes from dark red to pale
red.
Indicates that print data has been transferred from the host.
Standard display (no current print data from the host).
Indicates that the controller is performing a restart.
If this message is displayed, the host has to repeat the print data transfer
since it cannot be guaranteed that the last pages were correctly
transferred and fused before the error occurred.
Standard display (no controller restart).
A29246-X17-X-4-7680 / do401.fm