Buttons - Oce TDS400 User Manual

Buttons

With the buttons on the operator panel you can make the settings for the Océ
TDS400 Printer.
The following buttons are available
Available Buttons
Button types
On line button
Next/select button
Previous button
Browse buttons
Stop button
24 Océ TDS400 Digital Multifunctional System User Manual
Function
Press the on line button to put the printer on line or off line. To
activate the program mode and to enter the top level menu. You
can use the 'next/select' button, the 'previous' button and the
browse button to go through the menu. If the green light above
the on line button is on, the printer is on line; if this light is off,
the printer is off line.
To select an option or a setting in the menu. Or in case a sub-
menu is present, enter a menu on a lower level.
Press this button to go one level higher in the menu.
These two buttons are used to select another mode at the same
level of the menu, or to display the next or previous option from
the option list.
The red stop button is used to stop the present print job.