Enable The Separator Sheets - Oce VarioPrint 6000 User Manual Operating Information

Enable the separator sheets

Introduction
When you print jobs with many sets, it can be difficult to identify your sets in the stack
of paper.
You can separate your sets in two ways:
• By 'Offset stacking', see
Each set or job will be stacked with an offset compared to the previous set or job.
•
By 'Separator sheets'.
A separator sheet is a sheet that is inserted before each set. Separator sheets are handy,
for example, when you want to transport the sets in one straight stack in the original
box. You can define the media you want to use as separator sheets in the Settings Ed-
itor.
This section describes how to enable the separator sheets.
Enable the separator sheets
On the operator panel, press the 'Jobs' button.
1.
In the list of 'Waiting jobs' or 'Scheduled jobs', touch the job you want to edit.
2.
Touch the 'Separator sheets' button when the button states 'Off'.
3.
The text changes from 'Off' to 'On'.
'Change the stacking method per job' on page
Chapter 5 - Working with the operator panel
Enable the separator sheets
83.
81