Error Handling And Output Recovery - Oce VarioPrint 6000 User Manual Operating Information

Error handling and output recovery

Introduction
TheOcé VarioPrint® 6000 Ultra Line is equipped with very efficient and reliable error
recovery. Some printing environments, however, require that multiple copies be avoided.
For example, in transactions involving the printing of valuable documents such as cheques.
In such an environment, you can enable the output recovery functionality.
Output recovery means that automatic error recovery is suppressed. Errors are recovered
by the server. All pending pages in the printer will be deleted. An error results in a stack
eject. This means that it is the responsibility of the operator to restart the job manually
on the correct page, in case of an error. By default, output recovery is disabled. In the
Settings Editor, you can enable output recovery in the IPDS transaction printing setups.
PCL transaction printing does not support output recovery.
This section describes the difference between the default error handling and the error
handling with output recovery enabled.
Note:
You can enable output recovery in IPDS transaction printing setups only.
Note:
When you enable output recovery, the intermediate check print and the sample sheet
interval are automatically disabled.
Error handling with output recovery in IPDS
The table shows what happens when an error occurs during a transaction print job with
output recovery. Pages that are copied to the memory of the controller are deleted from
the system. The operator must send these missing pages to the printer as a (new) print
job transaction.
Error handling and output recovery
Chapter 5 - Working with the operator panel 163