Check The Status Of The Toner Reservoirs; Section..........................................107 Reservoirs - Oce VarioPrint 6000 User Manual Operating Information

Check the status of the toner reservoirs

Introduction
The machine has 2 toner reservoirs. The toner reservoirs are located at the left-hand side
and the right-hand side of the engine module
on page 26. You can check the status of the toner reservoirs in the dashboard
board' on page 40
filling level of each toner reservoir as a percentage. The icons in the following table indicate
the status of the toner reservoirs.
This section gives an overview of the possible toner statuses. Furthermore, this section
describes how to check the status.
The meaning of the toner icons
The toner icons
Toner icon
and in the 'System' view. The 'System' view also displays the current
#
Description
The toner icon is blue. All 3 blocks of the status bar are green.
The toner reservoir is filled over 75%. Do not add toner.
The toner icon is blue. 2 Blocks of the status bar are green. The
toner reservoir is filled over 50%. You can add 1 bottle of toner.
The toner icon is blue. 1 Block of the status bar is green. The
toner reservoir is filled over 25%. You can add 2 bottles of
toner.
The toner icon is orange. The status bar contains no more green
blocks. The toner reservoir is filled less than 25%. The printer
can print another 600 sheets. You must add up to 3 toner bottles
as soon as possible.
The toner icon is red. The status bar has a red frame. The toner
reservoir is empty. The printing stops. You must add maximum
3 toner bottles to continue the printing.
The toner icon is grayed out. The status of the toner reservoir
is unknown. This status is only displayed when the system is
initializing.
The toner icon is grayed out and has a blue dotted frame. The
status bar is grayed out and has a red dotted frame. The status
of the toner reservoir is unknown. This status is only displayed
when the toner access cover is open.
Check the status of the toner reservoirs
'Introduction to the main system components'
Chapter 5 - Working with the operator panel
'The dash-
109