Introduction To The Océ Varioprint® 6000 Ultra Line - Oce VarioPrint 6000 User Manual Operating Information

Introduction to the Océ VarioPrint® 6000 Ultra Line
Introduction to the Océ VarioPrint® 6000 Ultra Line
Introduction
The Océ VarioPrint® 6000 Ultra Line is a series of high-volume, cut-sheet printers. The
machines are intended for both document printing and stream printing.
The key feature of the machine is the Océ Gemini Instant Duplex Technology. This
technology enables the machine to print the front side and back side of a sheet at the
same time. Depending on your version, the sustained print speed, including recondition-
ing, ranges from 170, 200, 250 to 314 images per minute (A4 / Letter) when you print
a 2-sided document.
The print speed for 1-sided documents (A4/Letter) ranges from 125 images per minute
to 157 images per minute (Océ VarioPrint® 6320 only).
This section gives a short description of the main features of the machine.
Note:
Not all the configurations mentioned in this user manual are available worldwide. Please
contact your local dealer for the available configurations in your country.
Overview of the main features
• Océ Gemini Instant Duplex Technology that enables the printing on both sides of a
sheet at the same time.
• Advanced scheduling concept on the operator panel to keep the machine running.
• Load and assign the media while the machine prints.
• Support of up to 12 paper trays (total input capacity up to 13,800 sheets) and a roll
feeder.
•
Support of up to 3 stackers, a finisher, a stacker/stapler and other external finishers.
• Support of a large range of media, media sizes and media weights.
• Support of PS/PCL/PDF and streaming PS.
• Support of a large range of software products, for example the Océ PRISMA series,
®
Xerox
•
Support of RDO files via Océ DP Link.
• Support of a direct copy path from the optional Océ DS60 scanner to the printer.
16 Chapter 2 - Introduction
®
DigiPath and Xerox
® ®
FreeFlow Makeready, Kodak
®
KDK Link.