Introduction
iP&F (integrated Puncher & Folder)
Introduction
Introduction
The puncher/folder (integrated Puncher & Folder) enables you to punch holes in and/or
fold your documents. In this section, you can find details of the types of punching and
folding that are possible.
Puncher
The number of holes you may punch depends on the puncher installed in your configu-
ration:
•
2 or 4 punch holes for A4/A3 media (primarily for markets outside the USA)
•
2 or 3 punch holes for Letter/Ledger media (primarily for USA market).
Note:
The two punchers listed above are not interchangeable. You can only replace the entire
puncher with the same type.
Folder
Folding can be carried out on A3 and Ledger media, or media that has a size very similar
to A3 and Ledger. These media will be folded into A4 or Letter size. For the minimum
and maximum media sizes, please refer to
Folding methods available:
•
Z-fold
•
Half-fold
200
Chapter 6 - Optional finishers and other devices
'Main specifications of the folder' on page
227.