Die Sets Available - Oce VarioPrint 6000 User Manual Operating Information

Die sets available

Introduction
The puncher can use many different die sets to punch your documents. The punching
pattern of a die set determines the binding style of your document. This section describes
the die sets available for the puncher.
Note:
The puncher is available in 2 versions: one version for A4 media and one version for
Letter media. A4 punchers require an A4 die set. Letter punchers require a Letter die
set. You cannot use A4 die sets in Letter punchers, or the other way round.
Die set summary
Each punching style listed in the tables below requires a separate die set. All the die sets
can handle media up to 216 g/m² (80 lb. cover).
Die sets available for A4 punchers
Number of holes,
shape
2, round
4, round
12, round
20, rectangular
21, rectangular
23, round
34, round
47, round
Die sets available for Letter punchers
Number of holes,
shape
3, round
11, round
19, rectangular
#
Type of binding
Loose-leaf binding
Loose-leaf binding
®
VeloBind binding
Plastic Comb binding
Plastic Comb binding
Wire binding
Wire binding
Plastic Coil binding
#
Type of binding
Loose-leaf binding
®
VeloBind binding
Plastic Comb binding
Chapter 6 - Optional finishers and other devices
Die sets available
Type of die set
2-Hole
4-Hole
®
VeloBind
Plastic Bind
Plastic Bind
Wire 02:01 AM (2
holes/inch)
Wire 03:01 AM (3
holes/inch)
Color Coil
Type of die set
3-Hole
®
VeloBind
Plastic Bind
185