Troubleshooting - Oce VarioPrint 6000 User Manual Operating Information

Troubleshooting

Introduction
The main types of possible errors are the following.
•
Errors that relate to the machine
•
Errors that relate to the jobs
• Toner problems that relate to the use of fiber-rich media.
This section gives an overview of the possible errors and the solutions to these errors.
Note:
Only operators who received the special maintenance training are allowed to replace or
clean parts and solve paper jams in the process units.
Overview of the possible machine errors
Handle the machine errors
Error
Paper jam
Software error
Service re-
quired
Maintenance
required
#
Solution
Follow the instructions
on the operator panel.
Follow the instructions
on the operator panel.
Follow the instructions
on the operator panel.
Follow the instructions
on the operator panel.
Additional information
After you solved the error, the machine
starts from the point where the printing
stopped due to the error. Please check for
double prints.
A message on the operator panel will indi-
cate that you must restart the machine.
A message on the operator panel will indi-
cate that you must call Service.
The maintenance wizard appears. You
need the maintenance PIN to access the
maintenance mode. The machine is auto-
matically switched off.
Note:
Only trained operators are al-
lowed to perform maintenance
tasks.
Chapter 7 - Keeping the printer running
Troubleshooting
247