Puncher replacement
Replace the puncher
Introduction
Please contact your supplier for a replacement puncher if the old one becomes worn out.
This section describes how to remove the old puncher and install a new puncher.
When to do
Only replace a puncher when the printer is on hold.
Required tool
•
Number 10 socket wrench (supplied with the printer)
Access the folding unit
#
Step
1
2
Action
Open the front door of the
puncher/folder.
Lift the handle and pull out the
folding unit.
Illustration
[148]
Chapter 6 - Optional finishers and other devices
Replace the puncher
221