Create A Transaction Setup - Oce VarioPrint 6000 User Manual Operating Information

Create a transaction setup

Introduction
When you want to use transaction printing, you have to create the necessary transaction
setups. You can create these setups in the Settings Editor.
Note:
If the Settings Editor does not display the correct language, you can change the preferred
language in the internet options of your internet browser. The desired language must
be first in the list of languages.
How to create a new transaction setup
Go to 'Transaction Printing' - 'Setups' .
1.
Click the 'Add' button.
2.
A pop-up window appears.
Type in the name and the description of the transaction setup.
3.
Click 'Ok'.
4.
Place a checkmark in front of the transaction setup to select the setup.
5.
Change the settings (see
6.
change the PCL parameters' on page
You can change the settings:
• by group (click the pencil at the right-hand side of the group settings). This is the
preferred method.
• by item (click the pencil behind the individual settings).
Note:
The status of the setup is changed to modified. You have to load the setup to make these
modifications available on the printer.
Before you can load a transaction setup, you have to switch the transaction printing mode
off-line.
Go to 'Transaction Printing' - 'Settings', and click 'Toggle the transaction printing mode'
7.
to switch the printer off-line.
Go to 'Transaction Printing' - 'Setups', and click 'Load'.
8.
The setup is now available on your operator panel.
How to change the IPDS parameters
Go to 'Transaction Printing' - 'IPDS setup'.
1.
'How to change the IPDS parameters' on page 175
176).
Chapter 5 - Working with the operator panel
Create a transaction setup
or 'How to
175