Illustration
[112] Example of a 'Media message'
How to handle the 'Media message' in the tray-to-tray mode
A message on the operator panel indicates that a media is missing. Select one of the fol-
1.
lowing actions as a response to the message.
•
Press 'Assign media'.
Continue with step 2 when you select this option.
•
Press 'Continue'.
The controller will use the PCL default media and continue the print job.
Note that this might be an incorrect media.
•
Press 'Cancel stream'.
The print job is stopped. You can now solve the problem. You will most likely be able
to solve the problem on the server.
Note:
Steps 2 and 3 apply only when you chose to assign a media.
Chapter 5 - Working with the operator panel
Handle the media messages
173