7" X 10" Statement Size Support - Oce VarioPrint 6000 User Manual Operating Information

7" x 10" Statement Size Support

7" x 10" Statement Size Support
Introduction
The smallest media size that this machine supports is 203 x 203 mm / 7.9 x 7.9 inch.
The 7" x 10" Statement Size Support device enables you to print on media with a size of
7 x 10 inches / 178 x 254 mm.
You can insert this device in your paper tray without modifying your paper tray. This
device is delivered with 'Installation instructions'.
Note:
If you want to print on 7 x 10 inch media, this media has to be available in the media
catalog. If the media catalog does not contain the 7 x 10 inch media, you have to register
this media first, (see
Note:
If you print on 7 x 10 inch media, it is important that the paper tray contains enough
media. The dashboard informs you when to load media.
Note:
Remove the device from the paper tray, when you want to load other media than 7 x
10 inch media.
How to load the media with the 7" x 10" Statement Size Support
#
Action
1 Open the paper tray
'Perform a media registration for standard-size media' on page
Chapter 6 - Optional finishers and other devices
7" x 10" Statement Size Support
Illustration
145).
235