Enable or disable the use of trailer pages
Introduction
A trailer page contains an overview of the job settings (for example used media and fin-
ishing). A trailer page is printed at the end of a job. You can only enable this setting in
the Settings Editor. Media for trailer pages are the same as for banner pages. You can
specify this media in the media catalogue in the Settings Editor.
Note:
This setting applies to all jobs from the moment it is enabled.
How to enable or disable trailer pages
In the Settings Editor, go to the 'Preferences' / 'Print job defaults' section.
1.
Change the setting for trailer pages: 'Trailer page enabled'.
2.
Enable or disable the use of trailer pages
Chapter 5 - Working with the operator panel
95